| 1,205 | 12 | 75 |
| 下载次数 | 被引频次 | 阅读次数 |
为验证MATLAB在ABAQUS二次开发中的应用,使用MATLAB编程对T型梁的网格划分进行优化,并且反分析模型的材料参数,计算得到了回弹补偿方程。提出一种基于平面曲线基本方程的几何回弹补偿方法,结合回弹补偿方程,对壁板的时效成形模具型面进行初步的回弹补偿。利用所开发的程序,以几何回弹补偿型面为初始值,对模具型面进行迭代补偿。仿真结果显示,壁板成形后的外形和设计外形的偏差在0.8mm以内。证明了MATLAB在ABAQUS二次开发中的有效性。
Abstract：To verify its application in the secondary development for ABAQUS,MATLAB has been used to develop the software to optimize meshes of T-beam and to back-analyze its material parameters.The software also could automatically calculate a springback compensation function with finite element model of T-beam.Based on the essential function of planar curve,a geometry compensation method has been proposed.The method,combined with the springback compensation function,has been used by the software to design a rudimentary age forming mold contour for an integrated panel.Then the software iteratively offset the forming error of the surface.The final simulation result showed that the difference between the panel's contour and its design shape was less than 0.8mm.The effectiveness of MATLAB in ABAQUS' secondary development has been proved.
[1]曾元松,黄遐,黄硕.蠕变时效成形技术研究现状与发展趋势[J].塑性工程学报,2008.15(3):1-8
[2]甘忠,张磊,许旭东等.整体壁板时效成形模具回弹补偿的工艺研究[J].塑性工程学报,2010.17(5):15-18
[3]甘忠,朱加赞,张磊等.高筋条整体壁板时效成形二维回弹补偿[J].机械科学与技术,2012.31(3):452-456
[4]王超.时效成形模具型面构造技术研究[D].西安:西北工业大学,2008
[5]吕源.双曲率时效成形模具型面构造技术[D].西安:西北工业大学,2011
[6]Andrew Levers.Finite element analysis of creep ageforming[C].ABAQUS USERS CONFERENCE,1998:461-474
[7]黄霖,万敏,吴向东等.整体壁板时效成形的回弹预测及模面补偿技术[J].航空学报,2009.30(8):1531-1536
[8]黄霖,万敏.铝合金厚板时效成形回弹补偿算法[J].航空学报,2008.29(5):1406-1410
[9]朱加赞.铝合金整体壁板时效成形仿真与模具设计[D].西安:西北工业大学,2012
[10]熊威,甘忠,熊士鹏等.基于MATLAB的ABAQUS二次开发(上)——解决方案与技术要点[J].塑性工程学报,2012.19(4):21-26
[11]熊威,甘忠,许旭东等.基于粘弹塑性模型的时效成形仿真[J].塑性工程学报,2012.19(2):33-37
[12]王晓林,周贤宾.金属板弹塑性非圆弧弯曲回弹的计算[J].塑性工程学报,1996.3(4):27-33
基本信息:
中图分类号:TG156.92;TP311.1
引用信息:
[1]熊威,甘忠,庄振民,等.基于MATLAB的ABAQUS二次开发(下)——在时效成形回弹补偿中的应用[J].塑性工程学报,2012,19(05):78-81+99.
2012-10-28
2012-10-28