参考文献

[1] FROES F.Advanced metals for aerospace and automotive use [J].Materials Science and Engineering:A,1994,184(2):119-33.

[2] 张关梅，黄海广，张浩泽，等.轧制温度对TA31钛合金热轧板材组织与性能的影响[J].塑性工程学报，2022,29(11):224-232.ZHANG Guanmei,HUANG Haiguang,ZHANG Haoze,et al.Effect of rolling temperature on microstructure and properties of TA31 titanium alloy hot rolled plate,[J].Journal of Plasticity Engineering,2022,29(11):224-232.

[3] CAPPOLA J,STINVILLE J-C,CHARPAGNE M-A,et al.On the localization of plastic strain in microtextured regions of Ti-6Al-4V [J].Acta Materialia,2021,204:116492.

[4] SRINIVASAN R,MIRACLE D,TAMIRISAKANDALA S.Direct rolling of as-cast Ti-6Al-4V modified with trace additions of boron [J].Materials Science and Engineering:A,2008,487(1-2):541-51.

[5] QIU G Z,GUO Y F.Current situation and development trend of titanium metal industry in China [J].International Journal of Minerals,Metallurgy and Materials,2022,29(4):599-610.

[6] 王晋忠，王惠梅，王永飞，等.变形态TC4钛合金热压缩本构方程及热加工图研究[J].热加工工艺，2023,52(23):100-104,108.WANG jinzhong,WANG Huimei,WANG Yongfei,et al.Study on constitutive equation and thermal processing map of deformed tc4 titanium alloy under hot compression[J].Hot Working Technology,2023,52(23):100-104,108.

[7] 许成.TC4钛合金板材热轧工艺研究 [D] 秦皇岛：燕山大学，2018.XU Cheng.Study on hot rolling process of TC4 titanium alloy sheet[D].Qinhuangdao:Yanshan University,2018.

[8] ZHANG H,HUANG G,ROVEN H J,et al.Influence of different rolling routes on the microstructure evolution and properties of AZ31 magnesium alloy sheets [J].Materials & Design,2013,50:667-73.

[9] LIU D K,HUANG G S,GONG G L,et al.Influence of different rolling routes on mechanical anisotropy and formability of commercially pure titanium sheet [J].Transactions of Nonferrous Metals Society of China,2017,27(6):1306-1312.

[10] 姚学峰.超细晶TC4钛合金的制备及组织与力学性能研究 [D].上海：上海交通大学，2017.YAO Xuefeng.Fabrication of ultrafined Ti6Al4V and their microstructure and mechanical properties[D].Shanghai:Shanghai Jiao Tong University,2017.

[11] 赵帅.EB炉熔铸TC4钛合金扁坯交叉热轧与热处理的组织和性能研究 [D].昆明：昆明理工大学，2019.ZHAO Shai.A dissertation submitted for the degree of master of materials processing engineering[D].Kunming:Kunming University of Science and Technology,2019.

[12] LI J P,LIU Z G,LI J.Influence of asymmetric hot rolling on microstructure and mechanical property of Ti-6Al-4V alloy sheet [J].Rare Metal Materials and Engineering,2016,45(5):1168-1174.

[13] TIAN Y,GUO Y H,WANG Z D,et al.Analysis of rolling pressure in asymmetrical rolling process by slab method [J].Journal of Iron and Steel Research International,2009,16(4):22-26.

[14] 刘宝龙，任廷志，何毅，等.金属板材异步轧制力理论模型 [J].燕山大学学报，2017,41(5):407-412,456.LIU Baolong,REN Tingzhi,HE Yi,et al.Theoretical model of asynchronous rolling force for metal sheets [J].Journal of Yanshan University,2017,41(5):407-412,456.

[15] WAUTHIER A,REGLE H,FORMIGONI J,et al.The effects of asymmetrical cold rolling on kinetics,grain size and texture in IF steels [J].Materials Characterization,2009,60(2):90-95.

[16] 白小雷，李建平，刘珍光，等.异步热轧及热处理对钛合金TC4组织和力学性能的影响 [J].热加工工艺，2015,44(7):44-46,50.BAI Xiaolei,LI Jianping,LIU Zhenguang,et al.Effects of asynchronous rolling and heat treatment on microstructure and mechanical properties of TC4 titanium alloy [J].Hot Working Technology,2015,44(7):44-46,50.

[17] 洪权.Ti-6Al-4V合金薄板包覆叠轧加工工艺与组织性能研究 [D].西安：西北工业大学，2005.HONG Quan.Study on the coating and rolling process and microstructure and properties of Ti-6Al-4V alloy thin plate[D].Xi′an:Northwestern Polytechnical University,2005.

[18] 任连保，王红武，胡清熊，等.TC4包复叠轧薄板组织与性能特征 [J].稀有金属，2004,28(1):274-276.REN Lianbao,WANG Hongwu,HU Qingxiong,et al.Microstructure and property characteristics of tc4 cladding rolled thin plate [J].Chinese Journal of Rare Metals,2004,28(1):274-276.

[19] 高维娜，王蕊宁，党鹏，等.各向异性优良的TC4宽幅薄板制备工艺研究 [J].热加工工艺，2014,43(19):152-154.GAO Weina,WANG Ruining,DANG Peng,et al.Research on preparation technology of wide tc4 sheet with excellent anisotropism[J].Hot Working Technology,2014,43(19):152-154.

[20] 张国霞，田云飞，王国栋，等.超塑成形用TC4钛合金薄板轧制工艺试验研究 [J].热加工工艺，2018,47(17):44-46,50.ZHANG Guoxia,TIAN Yunfei,WANG Guodong,et al.Experimental study on rolling process of TC4 titanium sheet for superplastic forming[J].Hot Working Technology,2018,47(17):44-46,50.

[21] 吕祥鸿，舒滢，赵国仙，等.钛合金石油管材的研究和应用进展 [J].稀有金属材料与工程，2014,43(6):1518-1524.Lü Xianghong,SHU Ying,ZHAO Guoxian,et al.Research and application progress of ti alloy oil country tubular goods[J].Rare Metal Materials and Engineering,2014,43(6):1518-1524.

[22] 熊汉城，黄海广，李志敏，等.退火温度对大口径TC4合金无缝管组织与性能的影响 [J].金属热处理，2019,44(12):107-111.XIONG Hancheng,HUANG Haiguang,LI Zhimin,et al.Effect of annealing temperature on microstructure and mechanical properties of large diameter TC4 titanium alloy seamless tube[J].Heat Treatment of Metals,2019,44(12):107-111.

[23] 李宝霞，李红博，赵富强，等.大规格TC4无缝管材工艺研究 [J].有色金属加工，2018,47(5):47-49.LI Baoxia,LI Hongbo,ZHAO Fuqiang,et al.Study on technology of large size TC4 seamless pipe[J].Nonferrous Metals Processing,2018,47(5):47-49.

[24] 黄帆，海敏娜，蒋继新.TC4钛合金热连轧棒材孔型改进 [J].金属世界，2019,(6):54-57.HUANG Fan,HAI Minna,JIANG Jixin,et al.Improvement of pass for TC4 titanium alloy hot continuous rolling bars[J].Metal World,2019,(6):54-57.

[25] LOPATIN N V.Effect of hot rolling by screw mill on microstructure of a Ti-6Al-4V titanium alloy [J].International Journal of Material Forming,2013,6(4):459-465.

[26] EASTON M A,QIAN M,PRASAD A,et al.Recent advances in grain refinement of light metals and alloys[J].Current Opinion in Solid State and Materials Science,2016,20(1):13-24.

[27] MURTY S V S N,NAYAN N,KUMAR P,et al.Microstructure-texture-mechanical properties relationship in multi-pass warm rolled Ti-6Al-4V alloy [J].Materials Science and Engineering:A,2014,589:174-81.

[28] SERGUEEVA A V,STOLYAROV V V,VALIEV R Z,et al.Enhanced superplasticity in a Ti-6Al-4V alloy processed by severe plastic deformation [J].Scripta Materialia,2000,43(9):819-824.

[29] SEMENOVA I P,RAAB G I,SAITOVA L R,et al.The effect of equal-channel angular pressing on the structure and mechanical behavior of Ti-6Al-4V alloy [J].Materials Science and Engineering:A,2004,387-389:805-808.

[30] ZHEREBTSOV S,SALISHCHEV G,?OJKOWSKI W.Strengthening of a Ti-6Al-4V titanium alloy by means of hydrostatic extrusion and other methods [J].Materials Science and Engineering:A,2009,515(1):43-48.

[31] LI H,WANG K,XIN L,et al.Effect of hot rolling and annealing on phase component,recrystallization,and mechanical properties of TC21 titanium alloy [J].Journal of Materials Engineering and Performance,2022,31(3):2496-508.

[32] WANG X,ZHAN M,GAO P,et al.Deformation mode dependent mechanism and kinetics of dynamic recrystallization in hot working of titanium alloy [J].Materials Science and Engineering:A,2020,772:138804.

[33] WANG X,ZHAN M,GAO P,et al.Deformation mode dependent mechanism and kinetics of dynamic recrystallization in hot working of titanium alloy [J].Materials Science and Engineering:A,2020,772:138804.

[34] SINGH A,SCHWARZER R.Evolution of texture during thermomechanical processing of titanium and its alloys [J].Transactions of the Indian Institute of Metals,2008,61(5):371-87.

[35] 韩盈，余伟，董恩涛，等.轧制工艺对TC4合金板材织构演变及组织和性能的影响 [J].稀有金属材料与工程，2021,50(10):3585-3590.HAN Ying,YU Wei,DONG Entao,et al.Effect of rolling process on texture evolution,microstructure and mechanical properties of TC4 alloy plate[J].Rare Metal Materials and Engineering,2021,50(10):3585-3590.

[36] 陈洪美，臧千昊，张静，等.冷轧TC4钛合金管材的织构研究 [J].特种铸造及有色合金，2015,35(10):1012-1015.CHEN Hongmei,ZANG Qianhao,ZHANG Jing,et al.Texture of tc4 titanium alloy tubes processed by cold rolling[J].Special Casting and Nonferrous alloys,2015,35(10):1012-1015.

[37] SONG J H,HONG K J,HA T K,et al.The effect of hot rolling condition on the anisotropy of mechanical properties in Ti-6Al-4V alloy [J].Materials Science and Engineering:A,2007,449-451:144-148.

[38] OBASI G,BIROSCA S,PRAKASH D L,et al.The influence of rolling temperature on texture evolution and variant selection during α→ β→ α phase transformation in Ti-6Al-4V [J].Acta Materialia,2012,60(17):6013-6024.

[39] 王伟，王萌，蔡军，等.EB炉熔炼TC4钛合金轧制过程中的组织演变与力学性能 [J].材料导报，2021,35(8):140-145.WANG Wei,WANG Meng,CAI Jun,et al.Microstructure evolution and mechanical properties of TC4 alloy prepared by electron beam cold hearth furnace during rolling process[J].Materials Reports,2021,35(8):140-145.

[40] SABAT R,SURYA PAVAN M,AAKASH D,et al.Mechanism of texture and microstructure evolution during warm rolling of Ti-6Al-4V alloy [J].Philosophical Magazine,2018,98(28):2562-2581.

[41] 丛阳阳.基于相变的TC4钛合金轧制过程模拟计算与研究 [D].秦皇岛：燕山大学，2014.CONG Yangyang.Simulation and research about tc4 alloy′s rolling process based on phase change[D].Qinhuangdao:Yanshan University,2014.

[42] 李瑞，关蕾，冯秋元，等.轧制工艺对TC4ELI钛合金超宽幅厚板材组织与力学性能的影响 [J].材料热处理学报，2020,41(1):39-43.LI Rui,GUAN Lei,FENG Qiuyuan,et al.Effect of rolling process on microstructure and mechanical properties of TC4eli titanium alloy with ultra-wide thickness plate[J].Transactions of Materials and Heat Treatment,2020,41(1):39-43.

[43] SUN S D,ZONG Y Y,SHAN D B,et al.Hot deformation behavior and microstructure evolution of TC4 titanium alloy [J].Transactions of Nonferrous Metals Society of China,2010,20(11):2181-2184.

[44] SALEM A A,GLAVICIC M G,SEMIATIN S L.The effect of preheat temperature and inter-pass reheating on microstructure and texture evolution during hot rolling of Ti-6Al-4V [J].Materials Science and Engineering:A,2008,496(1):169-176.

[45] LUO Y M,LIU J X,LI S K,et al.Effect of hot-rolling temperature on microstructure and dynamic mechanical properties of Ti-6Al-4V alloy [J].Rare Metal Materials and Engineering,2018,47(5):1333-1340.

[46] 任万波.轧制工艺对TC4中厚板组织和性能的影响 [J].钢铁钒钛，2020,41(2):58-62.REN Wanbo.Effect of rolling process on microstructure and properties of TC4 titanium alloy plate [J].Iron Steel Vanadium Titanium,2020,41(2):58-62.

[47] 徐森，孙静娜，崔永军.TC4钛合金板材热轧全流程温度场研究 [J].燕山大学学报，2021,45(2):122-128.XU Sen,SUN Jingna,CUI Yongjun.Free vibration of magnetic gear with intersecting axes under internal resonance[J].Journal of Yanshan University,2021,45(2):122-128.

[48] 姚学峰，付立铭，单爱党.大变形热轧制备超细晶TC4钛合金的组织与性能 [J].机械工程材料，2018,42(3):57-61,66.YAO Xuefeng,FU Liming,SHAN Aidang,Microstructure and mechanical properties of ultrafine-grained TC4 titanium alloy prepared by severe hot rolling[J].Materials for Mechanical Engineering,2018,42(3):57-61,66.

[49] 赵冰，侯红亮，李志强，等.TC4钛合金电子束自由成形/热轧加工组织演变规律研究 [J].材料导报，2015,29(8):1-6.ZHAO Bing,HOU Hongliang,LI Zhiqiang,et al.Microstructure evolution of TC4 titanium alloy during electron beam free forming and hot rolling[J].Materials Reports,2015,29(8):1-6.

[50] HU Y,HUO Y,HE T.Mechanical behavior and microstructure evolution of TC4 alloy during high temperature plastic deformation [J].Procedia Manufacturing,2020,50:642-646.

[51]YANG L Q,YANG Y Q.Deformed microstructure and texture of Ti6Al4V alloy [J].Transactions of Nonferrous Metals Society of China,2014,24(10):3103-3110.

[52] 刘睿，惠松骁，叶文君，等.冷却速度对TC4钛合金动态断裂韧性的影响 [J].中国有色金属学报，2010,20(S1):690-694.LIU Rui,HUI Songxiao,YE Wenjun,et al.Effects of cooling rate on dynamic fracture toughness for TC4 titanium alloy[J].The Chinese Journal of Nonferrous Metals,2010,20(S1):690-694.

[53] OU M,ZHANG S,SONG H,et al.Effects of different cooling methods on microstructure and mechanical properties of TC4 alloy[C]//High Performance Structural Materials:Chinese Materials Conference 2017 18th.Springer Singapore,2018:539-547.

[54] 梁爽，刘智鑫，孙雪娇，等.冷却速度对热轧后TC4钛合金小棒材组织与性能的影响 [J].有色冶金节能，2017,33(3):41-43.LIANG Shuang,LIU Zhixin,SUN Xuejiao,et al.Influence of cooling rate on microstructure and performance of TC4 titanium bars after hot rolling[J].Energy Saving of Non-ferrous Metallurgy,2017,33(3):41-43.

[55] 欧梅桂，夏麒帆，宋洪超，等.冷速对TC4钛合金组织和性能的影响 [J].稀有金属材料与工程，2019,48(2):638-643.OU Meigui,XIA Qifan,SONG Hongchao,et al.Effect of different cooling rates on microstructure and mechanical properties of TC4 alloy[J].Rare Metal Materials and Engineering,2019,48(2):638-643.

[56] 张家铭，余伟，张泽宇.工业纯钛热轧及冷轧板表面缺陷研究 [J].金属功能材料，2020,27(1):8-15.ZHANG Jiaming,YU Wei,ZHANG Zeyu.Research on surface defects of commercially pure titanium hot-rolled and cold-rolled plates[J].Metallic Functional Materials,2020,27(1):8-15.

[57] 孙付涛，韩晨.TC4钛合金板带高温成形性能研究 [J].有色金属材料与工程，2017,38(4):204-209.SUN Futao,HAN Chen.Study on high temperature forming performance of TC4 titanium alloy strip[J].Nonferrous Metal Materials and Engineering,2017,38(4):204-209.

[58] 崔岩，孙新军，董常青，等.TA1纯钛和TC4钛合金板热轧过程中表面氧化和渗氧行为 [J].热加工工艺，2022,51(3):13-16,25.CUI Yan,SUN Xinjun,DONG Changqing,et al.Surface oxidation and oxygen permeation behavior of ta1 pure titanium and TC4 titanium alloy plates during hot rolling[J].Hot Working Technology,2022,51(3):13-16,25.

[59] MA W,SHUANG F.The plastic flow stability of chip materials in metal cutting process[J].The International Journal of Advanced Manufacturing Technology,2019,105:1933-1948.

[60] MENG M,FAN X G,GUO L G,et al.Achieving fine-grained equiaxed alpha via thermo-mechanical loading under off-equilibrium state in two-phase Ti-alloys[J].Journal of Materials Processing Technology,2018,259:397-408.

[61] 刘诚，董洪波，张贵华，等基于Murty判据的TC4-DT合金加工图及失稳分析 [J].锻压技术，2015,40(1):113-8.LIU Cheng,DONG Hongbo,ZHANG Guihua,et al.Processing drawing and flow instability analysis of TC4-DT titanium alloy based on Murty criterion[J].Forging & Stamping Technology,2015,40(1):113-8.

[62] TENG X,WIERZBICKI T,COUQUE H.On the transition from adiabatic shear banding to fracture [J].Mechanics of Materials,2007,39(2):107-25.

[63] 刘新芹，张敏，李淑华.TC4和DT4合金的绝热剪切行为 [J].材料科学与工程学报，2009,27(5):755-757,803.LIU Xin-qin,ZHANG Min,LI Shuhua.Localized adiabatic shear deformation of TC4 and DT4 alloys[J].Journal of Materials Science Engineering,2009,27(5):755-757,803.

[64] 杨扬，程信林.绝热剪切的研究现状及发展趋势[J].中国有色金属学报，2002,(3):401-408.YANG Yang,CHENG Xinlin.Current status and trends in researches on adiabatic shearing[J].The Chinese Journal of Nonferrous Metals,2002,(3):401-8.

[65] 杨柳青，杨延清，陈爽，等.TC4钛合金绝热剪切带的微观组织及织构 [J].金属热处理，2014,39(11):15-19.YANG Liuqing,YANG Yanqing,CHEN Shuang,et al.Microstructure and texture of adiabatic shear band in TC4 titanium alloy[J].Heat Treatment of Metals,2014,39(11):15-19.

[66] LIU X,TAN C,ZHANG J,et al.Influence of microstructure and strain rate on adiabatic shearing behavior in Ti-6Al-4V alloys [J].Materials Science and Engineering:A,2009,501(1):30-36.

[67] LUO Y M,LIU J X,CHENG X W,et al.Adiabatic shear banding of hot-rolling Ti-6Al-4V alloy subjected to dynamic shearing and uniaxial dynamic compression [J].Rare Metals,2015,34(9):632-637.

[68] EL-MAGD E,ABOURIDOUANE M.Characterization,modelling and simulation of deformation and fracture behaviour of the light-weight wrought alloys under high strain rate loading [J].International Journal of Impact Engineering,2006,32(5):741-758.

[69] 李兴无，沙爱学，张旺峰，等.TA15合金及其在飞机结构中的应用前景 [J].钛工业进展，2003,(Z1):90-94.LI Xingwu,SHA Aixue,ZHANG Wangfeng,et al.TA15 titanium alloy and its applying prospects on airframe[J].Titanium Industry Progress,2003,(Z1):90-94.

[70] 于德军.钛合金热加工工艺的有限元模拟[D].沈阳：东北大学，2018.YU Dejun.Finite element simulation of some hot working process of titanium alloys[D].Shenyang:Northeastern University,2018.

[71] SHI J,YU W,DONG E,et al.Finite element simulation for hot continuous-Rolled TC4 Alloy Seamless Pipe[C]// Advances in Materials Processing:Proceedings of Chinese Materials Conference 2017 18th.Springer Singapore,2018:705-716.

[72] MAHIN K W,HANSON K,MORRIS J W.Comparative analysis of the cellular and Johnson-Mehl microstructures through computer simulation [J].Acta Metallurgica,1980,28(4):443-453.

[73] ROLLETT A D,LUTON M J,SROLOVITZ D J.Microstructural simulation of dynamic recrystallization [J].Acta Metallurgica et Materialia,1992,40(1):43-55.

[74] HESSELBARTH H W,G?BEL I.Simulation of recrystallization by cellular automata [J].Acta Metallurgica et Materialia,1991,39(9):2135-2143.

[75] 刘诚，董洪波.TC4-DT钛合金β锻动态再结晶元胞自动机模拟 [J].航空材料学报，2015,35(2):21-27.LIU Cheng,DONG Hongbo.TC4-DT titanium alloy β simulation of dynamic recrystallization cellular automata for forging [J].Journal of Aeronautical Materials,2015,35(2):21-27.

[76] HAN F,WANG Y,CHEN R,et al.Cellular automata simulation of the dynamic recrystallization of the TC4 alloy during hot compression[J].Materials & Technologies/Materiali in Tehnologije,2019,53(5):717-724.