参考文献

[1] WANG Y,ZHAO G.Hot extrusion processing of Al-Li alloy profiles and related issues:A review [J].Chinese Journal of Mechanical Engineering,2020,33(4):14-37

[2] 吴向红，赵国群，孙胜，等.挤压速度和摩擦状态对铝型材挤压过程的影响 [J].塑性工程学报，2007,14(1):36-41.WU Xianghong,ZHAO Guoqun,SUN Sheng,et al.The influence of extrusion speed and frictional status on aluminum profile extrusion processes [J].Journal of Plasticity Engineering,2007,17(1):36-41.

[3] 李落星，周佳，张辉.车身用铝、镁合金先进挤压成形技术及应用 [J].机械工程学报，2012,48(18):35-43.LI Luoxing,ZHOU Jia,ZHANG Hui.Advanced extrusion technology and application of aluminium,magnesium alloy for vehicle body[J].Journal of Mechanical Engineering,2012,48(18):35-43.

[4] CHATTI S,DIRKSEN U,SCHIKORRA M,et al.System for design and computation of lightweight structures made of bent profiles [J].Advanced Materials Research,2005,6-8:279-286.

[5] YANG H,LI H,ZHANG Z,et al.Advances and trends on tube bending forming technologies [J].Chinese Journal of Aeronautics,2012,25(1):1-12.

[6] ZHOU W,SHAO Z,YU J,et al.Advances and trends in forming curved extrusion profiles [J].Materials,2021,14(7):1603.

[7] 徐义，李落星，李光耀，等.型材弯曲工艺的现状及发展前景 [J].塑性工程学报，2008,15(3):61-70.XU Yi,LI Luoxing,LI Guangyao,et al.Extrusion bending:Method,application and recent development [J].Journal of Plasticity Engineering,2008,15(3):61-70.

[8] UTSUMI N,SAKAKI S.Countermeasures against undesirable phenomena in the draw-bending process for extruded square tubes [J].Journal of Materials Processing Technology,2002,123(2):264-269.

[9] 郭训忠，陶杰，王辉.航空导管先进成形技术的研究进展 [J].南京航空航天大学学报，2020,52(1):12-23.GUO Xunzhong,TAO Jie,WANG Hui,et al.Research progress on advanced forming technology for aviation tube [J].Journal of anjing University of Aeronautics and Astronautics,2020,52(10):12-23.26(6):1-17

[10] GANTNER P,BAUER H,HARRISON D K,et al.Free-bending-A new bending technique in the hydroforming process chain [J].Journal of Materials Processing Technology,2005,167(2-3):302-308.

[11] CHATTI S,HERMES M,TEKKAYA A E,et al.The new TSS bending process:3D bending of profiles with arbitrary cross-sections [J].Cirp Annals-Manufacturing Technology,2010,59(1):315-318.

[12] GUO X Z,MA Y N,CHEN W L,et al.Simulation and experimental research of the free bending process of a spatial tube [J].Journal of Materials Processing Technology,2018,255:137-149.

[13] 吴为，周鹏，徐鑫良，等.三维自由弯曲技术工艺及关键问题分析 [J].塑性工程学报，2023,30(7):1-8.WU Wei,ZHOU Peng,XU Xinliang,et al.Process and key issues analysis of 3D free bending technology [J].Journal of Plastic Engineering,2023,30(7):1-8.

[14] 高嵩，于长春，梁继才，等.铝型材多点三维拉压复合弯曲成形工艺 [J].机械工程学报，2019,55(20):152-159.GAO Song,YU Changchun,LIANG Jicai,et al.Multi-points 3D stretch-press bending technology for aluminium profile [J].Journal of Mechanical Engineering,2019,55(20):152-159.

[15] TEKKAYA E A,KHALIFA B N,GRZANCIC G,et al.Forming of lightweight metal components:Need for new technologies [J].Procedia Engineering,2014,81:28-37.

[16] VOLLERTSEN F,SPRENGER A,KRAUS J,et al.Extrusion,channel,and profile bending:A review [J].Journal of Materials Processing Technology,1999,87(1-3):1-27.

[17] HERMES M,CHATTI S,WEINRICH A,et al.Three-dimensional bending of profiles with stress superposition [J].International Journal of Material Forming,2008,1:133-136.

[18] SHIM D S,KIM K P,LEE K Y.Double-stage forming using critical pre-bending radius in roll bending of pipe with rectangular cross-section [J].Journal of Materials Processing Technology,2016,236:189-203.

[19] HASEGAWA O,MANABE K,MURAI T.Stretch press bending of AZ31 magnesium alloy extruded square tube[C]//International Conference on Technology of Plasticity.Nagoya,2014.doi:10.1299/jsmemp.2009.17.312-1.

[20] HENG L,HE Y,MEI Z,et al.Role of mandrel in NC precision bending process of thin-walled tube [J].International Journal of Machine Tools and Manufacture,2007,47(7):1164-1175.

[21] KUBOKI T,TAKAHASHI K,ONO K,et al.A new schedule-free mandrel-less bending method for straight/pre-shaped long tubes [J].CIRP Annals,2013,62(1):303-306.

[22] BAUDIN S,RAY P,MAC DONALD B J,et al.Development of a novel method of tube bending using finite element simulation [J].Journal of Materials Processing Technology,2004,153:128-133.

[23] SEDIGHI M,KAHNAMOUEI J T.Role of filling material on defects of thin-walled tube bending process [J].Journal of Theoretical and Applied Mechanics,2014,52(1):227-233.

[24] LIU C M,LIU Y L,SUN H.A novel method to reduce the distortion of ridged rectangular tube in H-typed rotary draw bending [J].International Journal of Advanced Manufacturing Technology,2019,104(5-8):2149-2161.

[25] MüLLER K B.Bending of extruded profiles during extrusion process [J].International Journal of Machine Tools and Manufacture,2006,46(11):1238-1242.

[26] KHALIFA N B ,BECKER D ,SCHIKORRA M,et al.Recent developments in the manufacture of complex components by influencing the material flow during extrusion [J].Key Engineering Materials,2008,367:55-62.

[27] MUNZINGER C,LANZA G,RUCH D,et al.Component-specific scale for inline quality assurance of spatially curved extrusion profiles [J].Production Engineering,2010,4(2-3):193-201.

[28] KLEINER M.Method and device for the production of curved workpieces:European,EP0706843[P].1999-01-20.

[29] KLAUS A,BECKER D,KLEINER M.Three-dimensional curved profile extrusion-first results on the influence of gravity [J].Advanced Materials Research,2006,33(10):5-12.

[30] BECKER D,SELVAGGIO A,MARRé M,et al.Industrielle anwendungen für das neue fertigungsverfahren runden beim strangpressen [J].Lightweight Design,2009,2(4):78-86.

[31] BECKER D,SCHIKORRA M,TEKKAYA A E.Manufacture of 3D curved profiles for structure components [J].Advanced Materials Research,2008,43:1-8.

[32] MUNZINGER C,LANZA G,RUCH D,et al.Component-specific scale for inline quality assurance of spatially curved extrusion profiles [J].Production Engineering,2010,4(2):193-201.

[33] MUNZINGER C,FLEISCHER J,STENGEL G,et al.Accuracy of a flying cutting device [J].Advanced Materials Research,2008,43:23-35.

[34] SCHNEIDER M,KOEHLER G,BECKER D,et al.Towards the flexible and near-net-shape production of three-dimensionally curved extrusion profiles [J].Pro.Eng.Res.Devel.,2010,4(6):561-569.

[35] 李落星，刘志文，徐从昌.机器人主动牵引的三维变曲率型材在线弯曲成形装置：中国，CN107234443B [P].2020-04-03.

[36] 许亮，徐从昌，李落星.成形温度对铝合金型材挤压-弯曲一体化成形回弹及截面畸变的影响 [J].锻压技术，2021,46(9):154-162.XU Liang,XU Congchang,LI Luoxing.Influence of forming temperature on springback and cross-section distortion for aluminum alloy profile during extrusion-bending integration forming [J].Forging & Stamping Technolog,2021,46(9):154-162

[37] 于立，刘志文，李落星，等.挤压-弯曲一体化成型铝合金弯曲型材的质量与性能 [J].机械工程材料，2012,36(7):72-76.YU Li,LIU Zhiwen,LI Luoxing,et al.Quality and properties of curved aluminum alloy profile formed by extrusion-bending integration process [J].Materials for Mechanical Engineering,2012,36(7):72-76.

[38] CHEN F K,CHUANG W C,TORNG S.Finite element analysis of multi-hole extrusion of aluminium-alloy tubes [J].Journal of Materials Processing Technology,2008,201(1-3):150-155.

[39] DAJDA L,DIP L,HRANOS Z,et al.Extrusion of pipe bends and elbows-by means of die with eccentric hole and eccentrically mounted mandrel:German,DE2855449 [P].1980-07-03.

[40] SHIRAISHI M,NIKAWA M,GOTO Y.An investigation of the curvature of bars and tubes extruded through inclined dies [J].International Journal of Machine Tools & Manufacture,2003,43(15):1571-1578.

[41] TIEKINK J J.Extrusion method and extrusion apparatus:United States of America,US5305626 [P].1994-4-26.

[42] MIN F L,LIU H,ZHU G,et al.Self-bending extrusion molding of distorted channels [J].Journal of Mechanical Science and Technology,2021,35(5):1945-1953.

[43] MIN F L,ZHU G,CHANG Z,et al.Self-bending extrusion process for square tube aluminum profiles [J].The Chinese Journal of Nonferrous Metals,2020,30(9):2032-2040.

[44] 王雁鹏.镁合金弯曲构件错距挤压成形技术研究 [D].哈尔滨：哈尔滨理工大学，2020.WANG Yanpeng.Investigation on magnesium alloy bending products processed by staggered extrusion (SE) [D].Harbin:Harbin University of Science and Technology,2020.

[45] 宋继顺，马静云，马叙，等.偏心距对偏心挤压一次成型铝合金弯管的影响 [J].机械设计，2012,29(9):21-24.SONG Jishun,MA Jingyun,MA Xu,et al.The effect of eccentricity on the one-time forming of aluminum alloy bent pipes by eccentric extrusion[J].Journal of Machine Design,2012,29(9):21-24.

[46] TAKAHASHI Y,KIHARA S,YAMAJI K,et al.Effects of die dimensions for curvature extrusion of curved rectangular bars [J].Materials Transactions,2015,56(6):844-849.

[47] LI Q,SMITH C J,HARRIS C,et al.Finite element investigations upon the influence of pocket die designs on metal flow in aluminium extrusion-Part I.Effect of pocket angle and volume on metal flow [J].Journal of Materials Processing Technology,2003,135(2-3):189-196.

[48] LI Q,SMITH C J,HARRIS C,et al.Finite element modelling investigations upon the influence of pocket die designs on metal flow in aluminium extrusion-Part II.Effect of pocket geometry configurations on metal flow [J].Journal of Materials Processing Technology,2003,135(2-3):197-203.

[49] PENG Z,SHEPPARD T.Effect of die pockets on multi-hole die extrusion [J].Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing,2005,407(1-2):89-97.

[50] 闵范磊，朱光明，常征，等.方管铝型材自弯曲挤压工艺 [J].中国有色金属学报，2020,30(9):2032-2040.MIN Fanlei,ZHU Guangming,CHANG Zheng,et al.Self-bending extrusion process for square tube aluminum profiles [J].The Chinese Journal of Nonferrous Metals,2020,30(9):2032-2040.

[51] WANG Y P,LI F,SHI W Y,et al.Microstructure,bending behavior and texture evolution of AZ31B magnesium alloy bending products processed by staggered extrusion (SE) [J].Materials Characterization,2019,155:109842.

[52] ZHANG X J,LI F,WANG Y,et al.An analysis for magnesium alloy curvature products formed by staggered extrusion (SE) based on the upper bound method [J].International Journal of Advanced Manufacturing Technology,2022,119(1-2):303-313.

[53] WANG Y P,LI F,SHI W Y,et al.Dynamic recrystallization and metal flow behavior of AZ31 magnesium alloy bending products processed by staggered extrusion [J].Journal of Materials Engineering and Performance,2019,28(6):3551-3559.

[54] WANG Y P,LI F,LI X W.Effect of extrusion ratio (lambda) on dynamic recrystallization of AZ31 magnesium alloy bending products prepared by staggered extrusion (SE) [J].International Journal of Advanced Manufacturing Technology,2020,108(1-2):289-297.

[55] WANG Y P,LI F,WANG Y,et al.Effect of extrusion ratio on the microstructure and texture evolution of AZ31 magnesium alloy by the staggered extrusion (SE) [J].Journal of Magnesium and Alloys,2020,8(4):1304-1313.

[56] ZHANG X J,LI F,WANG Y,et al.Recrystallization behavior and texture evolution of magnesium alloy bending products under staggered extrusion [J].Journal of Materials Engineering and Performance,2021,30(11):8108-8116.

[57] 封志龙.多凸模主动控制弯曲管材挤压成形机理研究 [D].天津：天津理工大学，2012.FENG Zhilong.Mechanism study on the extrusion of bending pipe with many actively controlled punches [D].Tianjin:Tianjin University of Technology,2012.

[58] ZHOU W B,LIN J G,DEAN T A,et al.Feasibility studies of a novel extrusion process for curved profiles:Experimentation and modelling [J].International Journal of Machine Tools & Manufacture,2018,126:27-43.

[59] 宋继顺，杜德恒，马叙，等.双凸模差速挤压方形弯曲管件工艺过程有限元模拟 [J].重型机械，2010,(2):6-11,16.SONG Jishun,DU Deheng,MA Xu,et al.Finite element analysis of differential-velocity extrusion process of dual punch for bending tube [J].Heavy Machinery,2010,(2):6-11,16.

[60] ZHOU W B,LIN J G,DEAN T A,et al.A novel application of sideways extrusion to produce curved aluminium profiles:Feasibility study [J].Procedia Engineering,2017,207:2304-2309.

[61] ZHOU W B,YU J Q,LIN J G,et al.Effects of die land length and geometry on curvature and effective strain of profiles produced by a novel sideways extrusion process [J].Journal of Materials Processing Technology,2020,282:116682.

[62] 喻俊荃，赵国群.差速挤压弯曲型材的弯曲轮廓定量控制方法及系统：中国，CN115069852B [P].2023-03-21.

[63] ZHOU W B,LIN J G,DEAN T A,et al.Analysis and modelling of a novel process for extruding curved metal alloy profiles [J].International Journal of Mechanical Sciences,2018,138:524-536.

[64] ZHOU W B,SHI Z S,LIN J G,et al.An upper bound solution for deformation field analysis in differential velocity sideways extrusion using a unified stream function [J].International Journal of Mechanical Sciences,2022,224:107323.

[65] ZHOU W B,XI Z Q.Bending behaviour analysis of aluminium profiles in differential velocity sideways extrusion using a general flow field model [J].Metals,2022,12(5):877.

[66] ZHOU W B,YU J Q,LIN J G,et al.Manufacturing a curved profile with fine grains and high strength by differential velocity sideways extrusion [J].International Journal of Machine Tools & Manufacture,2019,140:77-88.

[67] ZHOU W B,YU J Q,LU X C,et al.A comparative study on deformation mechanisms,microstructures and mechanical properties of wide thin-ribbed sections formed by sideways and forward extrusion [J].International Journal of Machine Tools & Manufacture,2021,168:103771.

[68] LU X C,YU J Q,YARDLEY V A,et al.Solid-state welding and microstructural features of an aluminium alloy subjected to a novel two-billet differential velocity sideways extrusion process [J].Journal of Materials Processing Technology,2021,296:117189.

[69] LU X C,YU J Q,LIN J G,et al.Investigation of material flow behaviour and microstructure during differential velocity sideway extrusion [J].Procedia Manufacturing,2020,50:226-230.

[70] 喻俊荃，赵国群，朱传宝，等.一种实现双向挤压成形工艺的挤压模具、装置及方法：中国，CN111229852B [P].2020-11-06.

[71] 喻俊荃，林建国，朱传宝，等.一种双向挤压成形的工艺及装备：中国，CN111283006B [P].2021-04-30.

[72] TALEBIAN M,ALIZADEH M.Manufacturing Al/steel multilayered composite by accumulative roll bonding and the effects of subsequent annealing on the microstructural and mechanical characteristics [J].Materials Science and Engineering:A,2014,590:186-193.

[73] TANG J W,CHEN L,ZHAO G Q,et al.Achieving three-layered Al/Mg/Al sheet via combining porthole die co-extrusion and hot forging [J].Journal of Magnesium and Alloys,2020,8(3):654-666.

[74] 郭训忠，陶杰，唐巧生，等.TA1-Al双金属复合管冷推弯模拟及试验 [J].中国有色金属学报，2012,22(4):1053-1062.GUO Xunzhong,TAO Jie,TANG Qiaosheng,et al.Cold push-bending simulation and experiment on TAI-Al bimetallic clad tube [J].Chinese Journal of Nonferrous Metals,2012,22(4):1053-1062.

[75] FENG B,XIN Y C,GUO F L,et al.Compressive mechanical behavior of Al/Mg composite rods with different types of Al sleeve [J].Acta Materialia,2016,120:379-390.

[76] 喻俊荃，赵国群，朱传宝，等.一种多层弯曲结构的制造方法：中国，CN111283008B [P].2020-11-27.

[77] 喻俊荃，赵国群，朱传宝，等.一种正-侧复合加压成型装置及方法：中国，CN111283009B [P].2020-12-29.

[78] YU J Q,LIN J G,DEAN A T.Development of novel differential velocity sideway extrusion techniques to fabricate lightweight curved structural components [J].Procedia Manufacturing,2020,50:125-128.

[79] 喻俊荃，周文彬，邵祝涛，等.用于挤出弯曲型材的设备和方法：中国，CN113382810B [P].2023-02-21.