| 2,037 | 9 | 68 |
| 下载次数 | 被引频次 | 阅读次数 |
1994以来的30年，在国家重大需求的强劲牵引下，我国塑性成形技术与装备取得举世瞩目的巨大成就，研制出一大批世界第一的成形装备，实现了三大技术跨越，形成了规模最大的研究队伍，我国塑性成形技术总体水平进入世界先进国家行列，多个单项技术和装备达到国际领先水平。选择了其中8项最具代表性成果，并介绍其在塑性工程理论和技术上取得的重大突破以及对国家重大装备研制的突出贡献，分析了我国塑性成形技术与国际领先水平的差距。最后对我国塑性成形技术发展将呈现出的“三超两高”五大发展趋势进行了展望。
Abstract：In the last 30 years since 1994, remarkable achievements have been achieved in China in the field of metal forming technologies and equipments, under the strong traction of national great demands. A series of the largest equipments in the world were developed, the three major technical breakthroughs were realized and the largest scale of research teams were built up. The overall level of metal forming technologies in China has entered the ranking of advanced countries in the world, with several unit technologies and equipments reaching the international leading level. Eight of the most representative achievements were selected, and the major breakthrough in plastic engineering theory and technology and outstanding contributions to the development of national great equipment were introduced. The gap of metal forming technologies between China and the world-top level was analyzed. Finally, the five development trends named“three ‘ultra' and two ‘high'” in the development of metal forming technologies in China were prospected.
[1] “10000个科学难题”制造科学编委会.10000个科学难题(制造科学卷)[M].北京：科学出版社，2018.Manufacturing science editorial board of 10000 selected problems in sciences.10000 selected problems in sciences:Manufacturing science[M].Beijing:Science Press,2018.
[2] 中国科学技术协会.2010～2011机械工程学科发展路线图(成形制造)[M].北京：中国科学技术出版社，2011.China association for science and technology.2010-2011 report advances in mechanical engineering [M].Beijing:Science and Technology Press of China,2011.
[3] 林忠钦.复杂航空航天薄壁构件设计与制造[C]//第十八届全国塑性工程学术年会暨第十届全球华人塑性技术研讨会.武汉，2023.LIN Zhongqin.Design and manufacturing of complex components in aerospace industry[C]//The 18th National Conference on Technology of Plasticity and the 10th Global Chinese Plastic Technology Seminar.Wuhan,2023.
[4] 苑世剑.新世纪中国塑性加工行业的发展与展望[J].锻压技术，2018,43(7):12-16.YUAN Shijian.Development and perspectives on plastic forming industry of China in the new century[J].Forging & Stamping Technology,2018,43(7):12-16.
[5] 何海林，易幼平.2219铝合金大型环件组织性能调控方法与工程应用研究[J].机械工程学报，2020,56(3):40.
[6] ZHANG L,LI X Q,LI R Q,et al.Effects of high-intensity ultrasound on the microstructures and mechanical properties of ultra-large 2219 Al alloy ingot[J].Materials Science and Engineering A,2019,763:138154.
[7] ZHANG Y,LI R Q,CHEN P H,et al.Microstructural evolution of Al2Cu phase and mechanical properties of the large-scale Al alloy components under different consecutive manufacturing processes[J].Journal of Alloys and Compounds,2019,808:346-358.
[8] XU D F,CHEN K H,CHEN Y Q,et al.Evolution of the second-phase particles and their effect on tensile fracture behavior of 2219 Al-xCu alloys[J].Metals,2020,10:197.
[9] HE H,YI Y,HUANG S,et al.Effects of deformation temperature on second-phase particles and mechanical properties of 2219 Al-Cu alloy [J].Materials Science and Engineering:A,2018,712:414-423.
[10] MAO X C,YI Y P,HE H L,et al.Second phase particles and mechanical properties of 2219 aluminum alloys processed by an improved ring manufacturing process[J].Materials Science and Engineering:A,2020,781:139226.
[11] HE H L,YI Y P,HUANG S Q,et al.An improved process for grain refinement of large 2219 Al alloy rings and its influence on mechanical properties[J].Journal of Materials Science & Technology,2019,35(1):55-63.
[12] HE H L,YI Y P,HUANG S Q,et al.Effects of thermomechanical treatment on grain refinement,second-phase particle dissolution,and mechanical properties of 2219 Al alloy [J].Journal of Materials Processing Technology,2020,278:116506.
[13] CSU scientists forged China’s largest high-strength alloy ring for use in new-generation rockets [N].Nature,2019.https://www.nature.com/articles/d42473-019-00132-5.
[14] 黄庆学.高品质钢铁板带轧制关键装备与技术研究进展[J].机械工程学报，2023,59(20):34-63.HUANG Qingxue.Research progress on key equipment and technology of high quality steel plate and strip rolling[J].Journal of Mechanical Engineering,2023,59(20):34-63.
[15] 陈秀敏，申光宪，黄庆学.轧机压下螺纹副回松机理试验和铜螺母螺牙塑扁鼓包分析[J].机械工程学报，2007,43(4):168-172.CHEN Xiumin,SHEN Guangxian,HUANG Qingxue.Rapping experiment of rolling mill pressure screw-pairs and plastic bulge of nut teeth analysis[J].Journal of Mechanical Engineering,2007,43(4):168-172.
[16] 王效岗，黄庆学，马勤.十五辊组合矫直机矫直模型研究[J].四川大学学报(工程科学版),2008,(6):181-185.WANG Xiaogang,HUANG Qingxue,MA Qin.Research of leveling model of fifteen roller combination leveler[J].Journal of Sichuan University(Engineering Science Edition),2008,(6):181-185.
[17] 黄庆学，马立峰，李进宝，等.新型滚切剪非对称曲柄机构原理[J].机械工程学报，2008,44(5):119-123.HUANG Qingxue,MA Lifeng,LI Jinbao,et al.Principle of asymmetric crank mechanism of new-type rolling shear[J].Journal of Mechanical Engineering,2008,44(5):119-123.
[18] WANG T,LIU W L,LIU Y M,et al.Formation mechanism of dynamic multi-neutral points and cross shear zones in corrugated rolling of Cu/Al laminated composite[J].Journal of Materials Processing Technology,2021,295:117157.
[19] WANG T,WANG Y L,BIAN L P,et al.Microstructural evolution and mechanical behavior of Mg/Al laminated composite sheet by novel corrugated rolling and flat rolling[J].Materials Science and Engineering:A,2019,765:138318.
[20] WANG T,ZHAO W Q,YUN Y L,et al.A dynamic composite rolling model based on Lemaitre damage theory[J].International Journal of Mechanical Sciences,2024,269:109067,
[21] HAO P J,LIU Y M,WANG Z H,et al.Analysis of force and deformation parameters in corrugated clad rolling[J].International Journal of Mechanical Sciences,2023,243:108042.
[22] LI Z X,REZAEI S,WANG T,et al.Recent advances and trends in roll bonding process and bonding model:A review[J].Chinese Journal of Aeronautics,2023,36(4):36-74.
[23] JI C,NIU H,LI Z X,et al.Deformation law and bonding mechanism of 45 carbon steel/316L stainless steel cladding tubes fabricated by three-roll skew rolling bonding process[J].Journal of Materials Processing Technology,2024,325:118277.
[24] 吴晋，季策，李子轩，等.基于ABAQUS二次开发的无缝金属复合管三辊斜轧复合工艺参数化建模与数值模拟[J].塑性工程学报，2023,30(12):9-15.WU Jin,JI Ce,LI Zixuan,et al.Parametric modeling and numerical simulation of three-roll skew rolling bonding process of seamless metal cladding tubes based on ABAQUS secondary development[J].Journal of Plasticity Engineering,2023,30(12):9-15.
[25] 胡正寰，杨翠苹，王宝雨.我国轴类零件轧制技术进展[J].机械工程学报，2012,48(18):7-12.HU Zhenghuan YANG Cuiping WANG Baoyu.Development of part rolling technology in China[J].Journal of Mechanical Engineering,2012,48(18):7-12.
[26] HU Z H,WANG B Y,ZHENG Z H.Research and industrialization of near-net rolling processes used in shaft parts[J].Frontiers of Mechanical Engineering,2018,13:17-24.
[27] 张凯利，王宝雨，沈谨霞.楔横轧内直角小台阶精确轧齐曲线[J].工程科学学报，2022,44(1):59-67.ZHANG Kaili,WANG Baoyu,SHEN Jinxia.The accurate shaping curve for forming inside small right-angle step using cross-wedge rolling[J].Chinese Journal of Engineering,2022,44(1):59-67.
[28] SHEN J X,WANG B Y,YANG C P,et al.Theoretical study and prediction of the inner hole reduction and critical mandrel diameter in cross wedge rolling of hollow shaft [J].Journal of Materials Processing Technology,2021,294:117140.
[29] HUO Y M,BAI Q,WANG B Y,et al.A new application of unified constitutive equations for cross wedge rolling of a high-speed railway axle steel[J].Journal of Materials Processing Technology,2015,223:274-283.
[30] HUO Y M,LIN J G,BAI Q,et al.Prediction of microstructure and ductile damage of a high-speed railway axle steel during cross wedge rolling[J].Journal of Materials Processing Technology,2017,23:359-369.
[31] 赵然，张康生.楔横轧窄台阶轧齐曲线的微分方程解法[J].北京科技大学学报，2013,35(3):358-364.ZHAO Ran,ZHANG Kangsheng .Differential equation solution of shaping curves for narrow stepsin cross wedge rolling[J].Journal of University of Science and Technology Beijing,2013,35(3):358-364.
[32] 贾震，张康生，杨翠苹，等.楔横轧一次楔大断面收缩率成形机理[J].北京科技大学学报，2009,31(8):1046-1050.JIA Zhen,ZHANG Kangsheng,YANG Cuiping,et al.Forming principle of heavy section shrinkage cross wedge rolling by single wedge[J].Journal of University of Science and Technology Beijing,2009,31(8):1046-1050.
[33] YANG C P,MA J W,HU Z H.Analysis and design of cross wedge rolling hollow axle sleeve with mandrel[J].Journal of Materials Processing Technology,2017,239:346-358.
[34] LI J L,WANG B Y,FANG S,et al.A new process chain combining cross-wedge rolling and isothermal forging for the forming of titanium alloy turbine blades[J].The International Journal of Advanced Manufacturing Processes,2020,108:1827-1838.
[35] LI J L,WANG B Y,FANG S,et al.Investigation of the microstructure evolution and mechanical properties of a TC6 alloy blade preform produced by cross wedge rolling[J].Archives of Civil and Mechanical Engineering,2020,20(3):70.
[36] YUAN S J.Fundamentals and processes of fluid pressure forming processes for complex thin-walled components[J].Engineering,2021,7(3):358-366.
[37] YUAN S J.Modern hydroforming processes[M].Berlin:Springer Nature,2022.
[38] YUAN S J,HAN C,WANG X S.Hydroforming of automotive structural components with rectangular-sections [J].International Journal of Machine Tools and Manufacture,2006,46(11):1201-1206.
[39] 苑世剑，韩聪，王小松.空心变截面构件内高压成形工艺与装备[J].机械工程学报，2012,48(18):21-27.YUAN Shijian,HAN Cong,WANG Xiaosong.Hydroforming processes and equipments of hollow structures with various sections[J].Journal of Mechanical Engineering,2012,48(18):21-27.
[40] 苑世剑.现代液压成形技术[M].北京：国防工业出版社，2016.YUAN Shijian.Modern Hydroforming Technology[M].Beijing:National Defence Industry Press,2016.
[41] YUAN S J,CUI X L,WANG X S.Investigation into wrinkling behavior of thin-walled 5A02 aluminum alloy tubes under internal and external pressure[J].International Journal of Mechanical Sciences,2015,92:245-258.
[42] ALLWOOD J M,DUNCAN S R,CAO J,et al.Closed-loop control of product properties in metal forming[J].CIRP Annals,2016,65(2):573-96.
[43] 苑世剑，刘伟，徐永超.板材液压成形技术与装备新进展[J].机械工程学报，2015,51(8):20-28.YUAN Shijian,LIU Wei,XU Yongchao.New development on technology and equipment of sheet hydroforming[J].Journal of Mechanical Engineering,2015,51(8):20-28.
[44] YUAN S J,QI J,HE Z.An experimental investigation into the formability of hydroforming 5A02 Al-tubes at elevated temperature[J].Journal of Materials Processing Technology,2006,177(1-3):680-683.
[45] 华林，黄兴高，朱春东.环件轧制理论和技术[M].北京：机械工业出版社，2001.HUA Lin,HUANG Xinggao,ZHU Chundong.Theory and technology of ring rolling[M].Beijing:China Machine Press,2001.
[46] HUA L,DENG J D,QIAN D S.Recent development of ring rolling theory and technique[J].International Journal of Materials and Product Processes,2017,54:65-86.
[47] 钱东升.异形截面环件冷轧力学原理和工艺理论研究[M].武汉：武汉理工大学出版社，2012.QIAN Dongsheng.Research on mechanical principleand technology theory of profile cold ring rolling[M].Wuhan:Wuhan University of Technology Press,2012.
[48] 华林，钱东升.轴承精密轧制理论与技术[M].北京：科学出版社，2017.HUA Lin,QIAN Dongsheng.Precision rolling theory and technology for bearing [M].Beijing:Science Press,2017.
[49] 华林，钱东升，邓加东，等.超大型环件轧制理论与技术[J].锻压技术，2018,43(7):17-31.HUA Lin,QIAN Dongsheng,DENG Jiadong,et al.Theory and technology of super-large ring rolling[J].Forging & Stamping Technology,2018,43(7):17-31.
[50] HUA L,DENG J D,QIAN D S,et al.Modeling and application of ring stiffness condition for radial-axial ring rolling[J].International Journal of Machine Tools & Manufacture,2016,110:69-79.
[51] QIAN D,ZHANG Z,HUA L.An advanced manufacturing method for thick-wall and deep-groove ring-combined ring rolling[J].Journal of Materials Processing Technology,2013,213(8):1258-1267.
[52] LOHMAR J,CLEAVER C J,ALLWOOD J M .The influence of constraint rolls on temperature evolution and distribution in radial ring rolling[J].Journal of Materials Processing Technology,2020,282:116663.
[53] HUA L,DENG J,WANG X,et al.Combined ring rolling method for spherical valve body:US,US9919390B2 [P].2024-03-22.
[54] 兰箭，钱东升，邓加东，等.高性能环类零件绿色智能轧制的研究进展[J].机械工程学报，2022,58(20):186-197.LAN Jian,QIAN Dongsheng,DENG Jiadong,et al.Development of green and intelligent rolling for high performance ring parts [J].Journal of Mechanical Engineering,2022,58(20):186-197.
[55] CHEN L,ZHAO G Q,YU J Q,et al.Constitutive analysis of homogenized 7005 aluminum alloy at evaluated temperature for extrusion process[J].Materials & Design,2015,66:129-136.
[56] CHEN G J,CHEN L,ZHAO G Q,et al.Microstructure analysis of an Al-Zn-Mg alloy during porthole die extrusion based on modeling of constitutive equation and dynamic recrystallization[J].Journal of Alloys and Compounds,2017,710:80-91.
[57] ZHANG C S,WANG C X,GUO R,et al.Investigation of dynamic recrystallization and modeling of microstructure evolution of an Al-Mg-Si aluminum alloy during high-temperature deformation [J].Journal of Alloys and Compounds,2019,773:59-70.
[58] YU J Q,ZHAO G Q,CHEN L.Analysis of longitudinal weld seam defects and investigation of solid-state bonding criteria in porthole die extrusion process of aluminum alloy profiles[J].Journal of Materials Processing Technology,2016;237:31-47.
[59] WANG Y X,ZHAO G Q,CHEN X X,et al.Cracking behavior and prediction criterion of spraydeposited 2195 Al-Li alloy extrusion profile[J].The International Journal of Advanced Manufacturing Technology,2022,120:5969-5984.
[60] CHEN H,ZHAO G Q,ZHANG C S,et al.Numerical simulation of extrusion process and die structure optimization for a complex aluminum multicavity wallboard of high-speed train[J].Materials and Manufacturing Processes,2011,26:1530-1538.
[61] LIU M F,ZHANG C S,HE H X,et al.Interface microstructure evolution and mechanical properties of the extruded fiber-reinforced aluminum-based composite bar[J].Materials and Design,2020,188:108446.
[62] CHEN L,TANG J W,ZHAO G Q,et al.Fabrication of Al/Mg/Al laminate by a porthole die co-extrusion process[J].Journal of Materials Processing Technology,2018,258:165-173.
[63] WANG Y X,MA X W,ZHAO G Q,et al.Microstructure evolution of spray deposited and as-cast 2195 Al-Li alloys during homogenization [J].Journal of Materials Science & Technology,2021,82:161-178.
[64] GUO Z Y,ZHAO G,CHEN X G.Effects of two-step homogenization on precipitation behavior of Al3Zr dispersoids and recrystallization resistance in 7150 aluminum alloy [J].Materials Characterization,2015,102:122-130.
[65] ZHANG C S,ZHANG Z G,LIU M F,et al.Effects of single and multi-stage solid solution treatments on microstructure and properties of as-extruded AA7055 helical profile[J].Transactions of Nonferrous Metals Society of China,2021,31:1885-1901.
[66] WANG X W,ZHAO G Q,SUN L,et al.Effect of strain and dispersoids on abnormal grain growth,precipitation behavior and mechanical properties at longitudinal weld in Al-Li alloy profile[J].Journal of Materials Processing Technology,2023,322:118216.
[67] QUAN L W,ZHAO G,SAM G,et al.Effect of pre-stretching on microstructure of aged 2524 aluminium alloy[J].Transactions of Nonferrous Metals Society of China,2011,21:1957-1962.
[68] JIANG D M,LIU Y,LIANG S,et al.The effects of non-isothermal aging on the strength and corrosion behavior of Al-Zn-Mg-Cu alloy[J].Journal of Alloys and Compounds,2016,681:57-65.
[69] CHEN X X,MA X W,ZHAO G Q,et al.Effects of re-solution and re-aging treatment on mechanical property,corrosion resistance and electrochemical behavior of 2196 Al-Cu-Li alloy [J].Materials & Design,2021,204:109662.
[70] LAI X,PENG L,HU P,et al.Material behavior modelling in micro/meso-scale forming process with considering size/scale effects[J].Computational Materials Science,2008,43(4):1003-1009.
[71] PENG L,LIU F,NI J,et al.Size effects in thin sheet metal forming and its elastic-plastic constitutive model [J].Materials & Design,2007,28(5):1731-1736.
[72] PENG L,LAI X,LEE H J,et al.Friction behavior modeling and analysis in micro/meso scale metal forming process [J].Materials and Design,2010,31(4):1953-1961.
[73] XU Z T,PENG L F,FU M W,et al.Size effect affected formability of sheet metals in micro/meso scale plastic deformation:Experiment and modeling[J].International Journal of Plasticity,2015,68:34-54.
[74] PENG L,YI P,LAI X.Design and manufacturing of stainless steel bipolar plates for proton exchange membrane fuel cells [J].International Journal of Hydrogen Energy,2014,39(36):21127-21153.
[75] 林忠钦，李淑慧，于忠奇，等.汽车板精益成形技术[M].北京：机械工业出版社，2009.LIN Zhongqin,LI Shuhui,YU Zhongqi,et al.Lean forming technology for automotive panels[M].Beijing:China Machine Press,2009.
[76] DAN W J,LIN Z Q,LI S H,et al.Study on the mixture strain hardening of multi-phase steels[J].Materials Science and Engineering A,2012,552:1-8.
[77] DAN W J,LI S H,ZHANG W G,et al.The effect of strain-induced martensitic transformation on mechanical properties of TRIP steel[J].Materials & Design,2008,29(3):604-612.
[78] LI H W,YANG H,SUN Z C .A robust integration algorithm for implementing rate dependent crystal plasticity into explicit finite element method[J].International Journal of Plasticity,2008,24(2):267-288.
[79] ROTERS F,EISENLOHR P,HANTCHERLI L,et al.Overview of constitutive laws,kinematics,homogenization and multiscale methods in crystal plasticity finite-element modeling:Theory,experiments,applications[J].Acta Materialia,2010,58:1152-1211.
[80] GARCíA-GRAJALES J A,FERNáNDEZ A,LEARY D,et al.A new strain rate dependent continuum framework for Mg alloys[J].Computational Materials Science,2016,115:41-50.
[81] LI H W,SUN X X,YANG H.A three-dimensional cellular automata-crystal plasticity finite element model for predicting the multiscale interaction among heterogeneous deformation,DRX microstructural evolution and mechanical responses in titanium alloys[J].International Journal of Plasticity,2016,87:154-180.
[82] ZHANG J,LI H W,SUN X X,et al.A multi-scale MCCPFEM framework:Model ing of thermal interface grooving and deformation anisotropy of titanium alloy with lamellar colony[J].International Journal of Plasticity,2020,135:102804.
[83] PO G,MARIAN J,ADMAL N C.A unified framework for polycrystal plasticity with grain boundary evolution[J].International Journal of Plasticity,2018,106:1-30.
[84] YOON J W.AEPA2018 SPECIAL ISSUE:Evolution in metal forming research[J].International Journal of Plasticity,2020,135:102823
[85] SUN X X,LI H W,ZHAN M,et al.Cross-scale prediction from RVE to component[J].International Journal of Plasticity,2021,140:102973.
[86] SHAO G D,LI H W,ZHANG X,et al.Modelling of ultrasonic vibration-assisted forming considering the distribution of ultrasonic field with structure deformation[J].International Journal of Plasticity,2023,170:103744.
[87] YAN S L,YANG H,LI H W,et al.A unified model for coupling constitutive behavior and micro-defects evolution of aluminum alloys under high-strain-rate deformation[J].International Journal of Plasticity,2023,85:203-229.
[88] GAO J,LI H W,SUN X X,et al.Electro-thermal-mechanical coupled crystal plasticity modeling of Ni-based superalloy during electrically assisted deformation[J].International Journal of Plasticity,2023,157:103397.
[89] LI C M,HUANG L,ZHAO M J,et al.Influence of hot deformation on dynamic recrystallization behavior of 300M steel:Rules and modeling[J].Materials Science and Engineering:A,2020,797:139925.
[90] ZHAO M J,HUANG L,ZENG R,et al.In-situ observations and modeling of static recrystallization in 300 M steel[J].Materials Science and Engineering:A,2019,765:138300.
[91] ZHAO M J,HUANG L,ZENG R,et al.In-situ observations and modeling of metadynamic recrystallization in 300M steel[J].Materials Characterization,2020,159:109997.
[92] ZENG R,HUANG L,LI J J,et al.Quantification of multiple softening processes occurring during multi-stage thermoforming of high-strength steel[J].International Journal of Plasticity,2019,120:64-87.
[93] 赵明杰，邓磊，孙朝远，等.300M高强钢大型构件全流程锻造变形机理及工艺研究进展[J].科学通报，2022,67(11):1036-1053.ZHAO Mingjie,DENG Lei,SUN Chaoyuan,et al.Advances on the deformation mechanism and forging technology of 300M high-strength steel heavy components in the whole forging process [J].Chinese Science Bulletin,2022,67:1036-1053.
[94] HE Z B,ZHANG K,ZHU H H,et al.An anisotropic constitutive model for forming of aluminum tubes under both biaxial tension and pure shear stress states[J].International Journal of Plasticity,2022,152:103259.
[95] HU Q,LI X,HAN X,et al.A normalized stress invariant-based yield criterion:Modeling and validation[J].International Journal of Plasticity,2017,99:248-273.
[96] PARK N,STOUGHTON T B,YOON J W.A criterion for general description of anisotropic hardening considering strength differential effect with non-associated flow rule[J].International Journal of Plasticity,2019,121:76-100.
[97] XIAO Y,CHEN J,CAO J.A generalized thermodynamic approach for modeling nonlinear hardening behaviors[J].International Journal of Plasticity,2012,38:102-122.
[98] XIAO Y,CHEN J,ZHU X,et al.Modified maximum mechanical dissipation principle for rate-independent metal plasticity[J].Journal of Applied Mechanics,2013,80(6):061020.
[99] BARLAT F,VINCZE G,GRACIO J L,et al.Enhancements of homogenous anisotropic hardening model and application to mild and dual-phase steels[J].International Journal of Plasticity,2014,58:201-218
[100]LI S H,HE J,GU B,et al.Anisotropic fracture of advanced high strength steel sheets:Experiment and theory[J].International Journal of Plasticity,2018,103:95-118.
[101]HAN G F,HE J,LI S H.Simple shear deformation of sheet metals:Finite strain perturbation analysis and high-resolution quasi-in-situ strain measurement[J].International Journal of Plasticity,2022,150:103194.
[102]HAN G F,HE J,LI S H,et al.Simple shear methodology for local structure-property relationships of sheet metals:State-of-the-art and open issues[J].Progress in Materials Science,2024,143:101266.
[103]ZHAN M,YANG H,ZHANG J H,et al.3D FEM analysis of influence of roller feed rate on forming force and quality of cone spinning[J].Journal of Materials Processing Technology,2007,187-188:486-491.
[104]YANG H,LIN Y.Wrinkling analysis for forming limit of tube bending processes[J].Journal of Materials Processing Technology,2004,152(3):363-369.
[105]ZHAN M,YANG H,LIU Y.Deformation characteristic of the precision forging of a blade with a damper platform using 3D FEM analysis[J].Journal of Materials Processing Technology,2004,150(3):290-299.
[106]YANG H,XIAN F,LIU Y.A coordination model of the in-plane bending of strip metal under unequal compression[J].Journal of Materials Processing Technology,2001,114(2):103-108.
[107]中国机械工程学会.中国机械工程技术路线图[M].北京：机械工业出版社，2021.Chinese mechanical engineering society .Technology roadmaps of Chinese mechanical engineering[M].Beijing:China Machine Press,2021.
[108]国家基金委工程与材料科学部.机械工程学科发展战略报告(2011-2020)[M].北京：科学出版社，2010.
[109]苑世剑，何祝斌，胡卫龙.非理想材料塑性本构关系的研究现状及发展方向[J].塑性工程学报，2018,25(4):1-10.YUAN Shijian,HE Zhubin,HU Weilong.Present situation and developing directions of constitutive relations for non-ideal materials [J].Journal of Plasticity Engineering,2018,25(4):1-10.
基本信息:
DOI：
中图分类号:TG30
引用信息:
[1]林忠钦,黄庆学,苑世剑等.中国塑性成形技术和装备30年的重大突破与进展[J].塑性工程学报,2024,31(04):2-45.
基金信息: