| 461 | 9 | 68 |
| 下载次数 | 被引频次 | 阅读次数 |
近年来,一些复杂的各向异性屈服函数被广泛地用来描述各种先进材料塑性成形过程中的屈服行为。这类复杂屈服函数需要标定的参数多,部分力学性能测试实验复杂且参数不易获取。基于单向拉伸实验数据,提出先通过优化方法标定简单各向异性屈服函数(Hill48或Barlat91),通过其理论预测出复杂屈服函数标定所需的力学性能参数,并代替真实实验值完成复杂屈服函数的标定。以常用的Yld2000-2d和BBC2005屈服函数为例,对比分析了不同标定方法对屈服函数预测不同取向时的厚向异性系数、屈服应力以及屈服面的影响规律。通过与不同材料常规标定方法的对比分析,验证了所提出方法的可行性。
Abstract：In recent years,many complex anisotropic yield functions have been proposed and widely used in describing the advanced material's yield behavior during plastic forming progress. The identification of the yield functions needs a large number of material mechanics performance parameters,and some of the mechanics performance test experiments are not easy to conduct and the parameters are not easy to obtain. To identify some simple anisotropic yield functions( Hill48 or Barlat91),the optimization method was proposed first,with which the mechanics performance parameters needed in identifying the complex yield functions were theoretical predicted,then the identification of complex orthotropic yield functions was completed with the predicted parameters instead of the real experimental ones. Taking the common used yield function Yld2000-2d and BBC2005 for example,the influence of different identification methods on anisotropic parameters r value,yield stress with different angles to rolling direction and yield surface was analyzed. Finally,the feasibility of the proposed identification method was verified by comparing to the conventional identification method of different materials.
[1]史艳莉,吴建军.各向异性屈服准则的发展及应用[J].锻压技术,2006,31(1):99-103.SHI Yanli,WUJianjun.Development and applications of orthotropic yield criterions[J].Forging&Stamping Technology,2006,31(1):99-103
[2]王海波,万敏,阎昱,等.参数求解方法对屈服准则的各向异性行为描述能力的影响[J].机械工程学报,2013,49(24):45-53.WANG Haibo,WAN Min,YAN Yu,et al.Effect of the solving method of parameters on the description ability of the yield criterion about the anisotropic behavior[J].Journal of Mechanical Engineering,2013,49(24):45-53.
[3]何维杰,张士宏,程明,等.宏观弹塑性本构模型的研究进展[J].塑性工程学报,2015,22(3):1-11.HE Weijie,ZHANG Shihong,CHENG Ming,et al.Reviews on the development of macroscopic elastic-plastic constitutive models[J].Journal of Plasticity Engineering,2015,22(3):1-11.
[4]张飞飞,陈劼实,陈军,等.各向异性屈服准则的发展及实验验证综述[J].力学进展,2012,42(1):68-80.ZHANG Feifei,CHEN Jieshi,CHEN Jun,et al.Review on development and experimental validaton for anisotropic yield criterions[J].Advances in Mechanics,2012,42(1):68-80.
[5]叶平,沈剑平,王光耀,等.汽车轻量化用高强度钢材料现状及其发展[J].机械工程材料,2006,30(3):4-7.YE Ping,SHEN Jianping,WANG Guangyao,et al.Current situation and development of lightweight high strength steel used in Automobiles[J].Materials for Mechanical Engineering,2006,30(3):4-7.
[6]ARETZ H,HOPPERSTAD O S,LADEMO O G.Yield function calibration for orthotropic sheet metals based on uniaxial and plane strain tensile tests[J].Journal of Materials Processing Technology,2007,186:221-235.
[7]AYDM M S,GERLACH J,KESSLER L,et al.Yield locus evolution and constitutive parameter identification using plane strain tension and tensile tests[J].Journal of Materials Processing Technology,2011,211:1957-1964.
[8]RABAHALLAH M,BALAN T,BOUVIER S,et al.Parameter identification of advanced plastic strain rate potentials and impact on plastic anisotropy prediction[J].International Journal of Plasticity,1984,149(1):491-512.
[9]GRYTTEN F,HOLMEDAL B,HOPPERSTAD O S,et al.Evaluation of identification methods for YLD2004-18P[J].International Journal of Plasticity,2008,24:2248-2277.
[10]KHAFALLAH A,OLIVERIA M C,ALVES J L,et al.Mechanical characterization and constitutive parameter identification of anisotropic tubular materials for hydroforming applications[J].International Journal of Mechanical Sciences,2015,104:91-103.
[11]倪向贵,吴恒安,王宇,等.各向异性本构关系在板料成形数值模拟中的应用[J].计算力学学报,2003,20(2):231-235.NI Xianggui,WU Hengan,WANG Yu,et al.Application of anisotropic constitutive equations to numerical simulation of sheet forming[J].Chinese Journal of Computational Mechanics,2003,20(2):231-235.
[12]孙成智,陈关龙,林忠钦,等.各向异性屈服准则对铝合金板成形预测精度的影响[J].塑性工程学报,2004,11(3):59-63.SUN Chengzhi,CHEN Guanlong,LIN Zhongqin,et al.Effects of anisotropic yield criterial on the prediction of sheet metal forming of aluminum alloy sheet[J].Journal of Plasticity Engineering,2004,11(3):59-63.
[13]汤井伦,汪五贵,黎军顽,等.各向异性屈服准则对铝合金板深冲起皱预测的影响[J].南昌航空工业学院学报(自然科学版),2006,20(4):59-63.TANG Jinglun,WANG Wugui,LI Junwan,et al.Effects of anisotropic yield criterial on the prediction of wrinkle during the deepdrawing forming of aluminum alloy sheet[J].Journal of Nanchang Institute of Aeronautical Technology(Natural Science),2006,20(4):59-63.
[14]BANABIC D,ARETZ H,COMSA D S,et al.An improved analytical description of orthotropy in metallic sheets[J].International Journal of Plasticity,2005,21:493-512.
[15]BARLAT F,BREM J C,YOON J W.Plane stress yield function for aluminum alloy sheets-part 1:theory[J].International Journal of Plasticity,2003,19:1297-1319.
[16]BANABIC D,BALAN T,COMSA D S.A new yield criterion for plan-stress conditions[C]//Cold Metal Forming Conference.Cluj Napoca,Romania,2000:217-224.
[17]BANABIC D,KUWABARA T,BALAN T,et al.Non-quadratic yield criterion for orthotropic sheet metals under plane-stress conditions[J].International Journal of Mechanical Sciences,2003.45:797-811.
[18]BANABIC D,ARETZ H,COMSA D S,et al.An improved analytical description of orthotropy in metallic sheets[J].International Journal of Plasticity,2005,21:493-512.
[19]HILL R.The mathematical theory of plasticity[M].Oxford:Oxford Press,1950.
[20]BARLAT F,LIAN J.Plastic behavior and stretchability of sheet metals.part I:A yield function for orthotropic sheets under plan stress conditions[J].International Journal of Plasticity,1989,5:51-66.
基本信息:
中图分类号:TG301
引用信息:
[1]李健强,张赛军,龚小龙,等.基于优化方法的复杂各向异性屈服函数参数标定[J].塑性工程学报,2017,24(01):160-167.
基金信息:
2014年东莞市产学研合作项目(2014509109204);; 2013年省部产学研专项资金技术攻关项目(2013B090600014)
2017-03-01
2017-03-01
2017-03-01