| 581 | 16 | 80 |
| 下载次数 | 被引频次 | 阅读次数 |
针对2A14铝合金环件在轧制过程中经常出现的“鱼尾”缺陷，通过有限元模拟的方法研究了直径增长速度、轧制曲线及初始轧制温度对产生“鱼尾”深度的影响规律，并获得了最优工艺方案。继而进行了1∶1生产实验对该最优方案进行验证，所得2A14铝合金环件的“鱼尾”深度与预测值的偏差约为9.39%。通过单向拉伸实验分析了2A14铝合金环件径向、轴向和切向的屈服强度、抗拉强度和伸长率。所得最优的实验方案为：初始轧制温度取430℃、各阶段直径增长速度分别取3、5、8、1和1 mm·s-1,轧制曲线取直线形。
Abstract：Aiming at the ‘fishtail' defect that often occurs in the 2 A14 aluminum alloy ring part rolling process, the influence law of diameter growth rate, rolling curve and initial rolling temperature on the ‘fishtail' depth was studied by finite element simulation method, and the optimal process scheme was obtained. Then the 1∶1 production experiment was carried out to verify the optimal scheme. The deviation between the ‘fishtail' depth of 2 A14 aluminum alloy ring part and the predicted value is about 9.39%. The yield strength, tensile strength and elongation of 2 A14 aluminum alloy ring part in radial, axial and tangential directions were analyzed by uniaxial tensile experiments. The optimal experimental scheme is as follows: the initial rolling temperature is 430 ℃, the diameter growth rate of each stage is 3,5,8,1 and 1 mm·s-1, and the rolling curve is straight.
[1] 谷瑞杰，张淑莲，杨大祥，等.超大型环件径向轧制设备动梁受力分析和优化[J].重型机械，2012,(3):137-140.GU Ruijie,ZHANG Shulian,YANG Daxiang,et al.Stress analysis and optimization of moving beam for ultra-large ring radial rolling equipment[J].Heavy Machinery,2012,(3):137-140.
[2] 谷瑞杰，权晓惠，张淑莲，等.径轴向数控轧环机定心辊位置自动控制技术研究[J].重型机械，2013,(6):6-9.GU Ruijie,QUAN Xiaohui,ZHANG Shulian,et al.Research on automatic control technology of centering roll position in radial axial NC ring rolling machine[J].Heavy Machinery,2013,(6):6-9.
[3] 成思福，吴安东，阎晓燕，等.40Cr13环件径-轴向环轧工艺参数优化[J].机械管理开发，2018,33(12):1-4.CHENG Sifu,WU Andong,YAN Xiaoyan,et al.Optimization of diameter-axial ring rolling process parameters for 40Cr13 ring[J].Mechanical Management and Development,2018,33(12):1-4.
[4] 华林，钱东升，邓加东，等.超大型环件轧制理论与技术[J].锻压技术，2018,43(7):17-31.HUA Lin,QIAN Dongsheng,DENG Jiadong,et al.Theory and technology of super large ring rolling[J].Forging & Stamping Technology,2018,43(7):17-31.
[5] 李斌，王克鲁，鲁世强.TC4钛合金环件径轴向轧制数值模拟[J].热加工工艺，2011,(1):92-96.LI Bin,WANG Kelu,LU Shiqiang.Numerical simulation of radial axial rolling of TC4 titanium alloy ring[J].Hot Working Technology,2011,(1):92-96.
[6] 黄维鑫，郭良刚.Φ11 m 超大型 2219 铝环多工步轧制研究 [J].塑性工程学报，2020,27 (12):51-57.HUANG Weixin,GUO Lianggang.Study on multi-step rolling of Φ11 m super-large 2219 aluminum ring [J].Journal of Plasticity Engineering,2020,27 (12):51-57.
[7] 张锋，李永堂，齐会萍.环形铸坯热辗扩成形微观组织演变规律研究[J].锻压装备与制造技术，2011,(2):96-99.ZHANG Feng,LI Yongtang,QI Huiping.Microstructure evolution of ring billet during hot rolling[J].China Metalforming Equipment & Manufacturing Technology,2011,(2):96-99.
[8] 张淑莲，何养民，李忠周.超大直径铝合金环形件轧制工艺研究[J].兵器材料科学与工程，2007,(5):58-60.ZHANG Shulian,HE Yangmin,LI Zhongzhou.Research on rolling process of ring parts of super-large diameter aluminum alloy[J].Ordnance Material Science and Engineering,2007,(5):58-60.
[9] 付明杰.GH4169 合金环件精密辗轧过程中的运动学与力学分析[D].西安：西北工业大学，2007.FU Mingjie.Kinematic and mechanical analysis of GH4169 alloy ring during precision rolling[D].Xi′an:Northwestern Polytechnical University,2007.
[10] KHAN A A,NASR E A,AL-AHMARI A.An independent CAPP system for prismatic parts[J].International Journal of Rapid Manufacturing,2015,5(2):129-144.
[11] 郭良刚，邸伟佳，杨合，等.难变形材料环件双向辗轧过程轧制曲线设计方法[J].机械工程学报，2014,(16):83-88.GUO Lianggang,DI Weijia,YANG He,et al.Design method of rolling curve in bidirectional rolling process of refractory material ring[J].Journal of Mechanical Engineering,2014,(16):83-88.
[12] 华林，黄兴高，朱春东.环件轧制理论和技术[M].北京：机械工业出版社，2001.HUA Lin,HUANG Xinggao,ZHU Chundong.Ring rolling theory and technology [M].Beijing:China Machine Press,2001.
[13] 蒲思洪，孙莉芳，王龙祥.径-轴双向环轧工艺的研究进展[J].精密成形工程，2010,2(4):43-47,71.PU Sihong,SUN Lifang,WANG Longxiang.Research progress of diameter-axis bidirectional ring rolling process[J].Journal of Netshape Forming Engineering,2010,2(4):43-47,71.
[14] 姜玉洁.2A14铝合金-轴向轧制关键工艺研究[D].天津：天津职业技术师范大学，2021.JIANG Yujie.Research on main technology of 2A14 aluminum alloy diametral-axial rolling[D].Tianjin:Tianjin University of Technology and Education,2021.
[15] GB/T 16865—2013,变形铝镁及其合金加工制品拉伸试验用试样及方法[S].GB/T 16865—2013,Test specimens and methods for tensile test of wrought aluminium magnesium and its alloys[S].
基本信息:
中图分类号:TG339
引用信息:
[1]董晓传,吴润谋,姜玉洁,等.2A14铝合金环件轧制缺陷分析及工艺优化[J].塑性工程学报,2022,29(06):113-118.
基金信息:
天津市教委科研计划项目(2021KJ027); 天津市科技计划项目(20YDTPJC00310)
2022-07-01
2022-07-01
2022-07-01